Construction Timber & Firring Strips
At Woodstock Timber & Sons, we specialise in rough sawn and tanalised C24 graded construction Timber. Although commonly referred to as rough sawn, the finished style of our timber is known as “eased edge”. The rounded edge reduces risk of splinters and damage to the timber when strook against a hard object.
Construction Timber Sizing
To ensure quality, we import all our timber from parts of the world where it grows along the northern hemisphere. This ensures a slow grown and dense grain within our timber. You’ll often find our timber is machined from Scandinavian pine, usually redwood pine. An incredibly resilient softwood.
We also keep a large stock of C16 graded CLS timber in stock to keep your jobs cost-effective where building regulations will allow.
Standard sizes available as follows:
(Will be dynamic soon)
Please note, all sizes are metric.
Imperial measurements provided deviate from 5-60mm / quarter inch – 2 ½ inch
CLS (Studding timber)
Commonly referred to as “scant”, C16 Canadian lumber size (CLS) timbers are available from us too. All 2.4m lengths
Sizes:
3×2 (63×39)
4×2 (83×39)
Roofing/Tiling lath
Typically arriving in lengths of 3.6m/4m/4.8m, we stock lath at these sizes:
Sizes:
25×50
25×38
Custom Firring Strips
Custom firring strips and diminishing strips are available from us too. You tell us what you need, and we’ll have it ready by the next day at the latest!
We also offer a cutting service, so we can cut any timber purchased from us to any size that meets your requirements.
Conversion table: metric to imperial.
1 inch = 25mm |
1 foot = 300mm |
Need cutting services?
We also offer a cutting service, so we can cut any timber purchased from us to any size that meets your specific requirements.
